Description

We are the manufacturer of Ceramic Foam Filter. Our goods mainly for exporting, quality is super. We mentioned below information, for your information.1.(Silicon Carbide Foam Ceramic Filter)The status of requisite moulding temperature of ferroally solution and no pollution melting metal solution, decide that the basic material of Foam Ceramic Filte is SIC. Apply to purge and filter solution of nodular castiron malleable castiron castiron and other iron casting.2.(Zirconia Foam Ceramic Filter)The status of requisite moulding temperature of steel solution and no pollution melting metal solution, decide that the basic material of Foam Ceramic Filte is ZrO2. Apply to purge and filter solution of steel high temperature metal such as steel alloy stainless steel etc.3.(Magnesia Foam Ceramic Filter)Due to magnesium alloy is vivider than other nonferrous metal, magnesium alloy solution can filter easily react with the main material of foam ceramic filter, such as SiO, Al2O3 and liquate rapidly ceramic filter. So that magnesia or other oxide ceramics adopted to filter magnesium alloy.4.(Alumina Foam Ceramic Filter)CFA isAl2O3, with refractoriness:***0 , high strength and good heat-resistance wallop, apply to purge and filter solution of Aluminium alloy and other nunferrous alloy.5. Usual Specification and SelectBase on technological design of foam ceramic filter:1) Select suitable temperature filter according to kinds of alloy, the filter should not exceed temperature and damage.2) Select suitable bore density, purification is fit in with quality of casting.3) Select dimension of suitable filter, not increase time of moulding.4) Reduce the second dreg.5) Porosity: Filter ****0% when founding6. Usual Specification of ProductionCircle(mm):We can provide you all kinds of product by you desire.